PT-LX26
2,600 Lumens XGA portable projector

Superb performance

2,600 lumens of brightness
500:1 contrast
4,000 hours*¹ lamp life and 4,000 hours*² air filter replacement cycle
Quiet 29 dB*² noise level
XGA (1024 x 768) resolution

Easy setup and Operation

Real time keystone correction
1.2x zoom lens
Auto input signal search and on-screen guide
Colour and blackboard picture modes
Various terminals
Convenience functions for a variety of applications (Timer, Freeze frame, Digital zoom)

Other features

Direct power off
Anti-theft and security functions with customizable start up logo
Projector ID for remote control allocation (up to 6 projectors)
Built-in closed caption decoder

For pricing information on this product, please select "contact us - email" from the "support" menu at the top of this page. Choose "Professional imaging, Presentation and display" from the "Product category" menu and complete the form.

^*1 This is the maximum value when the lamp power is set to ECO mode with the lamp turned on for 2 hours and off for 0.25 hours. Increases in the lamp on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 3,000 hours. The usage environment affects the lamp replacement cycle.
^*2 With the lamp power set to ECO mode.

Portable projectors - Specifications

Models/features	PT-LX22	PT-LX26	PT-LX26H	PT- LX30H	PT- LW25H
LCD Panel
- Panel size	0.55" (14 mm) diagonal, (4:3 aspect ratio)	0.55" (14 mm) diagonal, (4:3 aspect ratio)	0.55" (14 mm) diagonal, (4:3 aspect ratio)	0.63" (16 mm) diagonal, (4:3 aspect ratio)	0.59" (15 mm) diagonal, (16:10 aspect ratio)
- Display method	Transparent LCD panel (x3, R/G/B)
- Pixels	786,432 (1,024 x 768) x3, Total pixels: 2,359,296		786,432 (1,024 x 768) x3, Total pixels: 2,359,296		1,024,000 (1,280 x 800) x3, Total pixels: 3,072,000
Lens	Manual zoom (1.2x) / Manual focus F2.10-2.25, f19.11 mm
Lamp	230 W UHM™, lamp replacement cycle (lamp power: High, NORMAL/ECO): 3,000 hrs/4,000 hrs)^*1
Screen size	0.76 - 7.62 m / 30 - 300 inches diagonally
Brightness^*2 (lamp power: high)	2,200 lumens	2,600 lumens	2,600 lumens	3,000 lumens	2,500 lumens
Center-to-corner uniformity ratio^*2	85%	85%	85%	85%	85%
Contrast ratio^*2	500:1 (full on/full off, lamp power: high)		2,500:1 (full on/full off, lamp power: high, Iris: on)		3,000:1 (full on/full off, lamp power: high, Iris: on)
Resolution^*3	1,024 x 768 pixels	1,024 x 768 pixels	1,024 x 768 pixels	1,024 x 768 pixels	1,280 x 800 pixels
Scanning frequency
RGB (analog)	fH: 15 kHz - 100 kHz, fV: 50 Hz - 100 Hz, dot clock: 140 MHz or lower (Signals exceeding 140 MHz are downsampled.)
YPbPr (YCbCr)	fH 15.75 kHz, fV 60 Hz (480i [525i]) / fH 31.50 kHz, fV 60 Hz (480p [525p])
	fH 15.63 kHz, fV 50 Hz (576i [625i]) / fH 31.25 kHz, fV 50 Hz (576p [625p])
	fH 37.50 kHz, fV 50 Hz (720 [750]/50p) / fH 45.00 kHz, fV 60 Hz (720 [750]/60p)
	fH 33.75 kHz, fV 60 Hz (1080 [1125]/60i) / fH 28.13 kHz, fV 50 Hz (1080 [1125]/50i)
S-Video / Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] / fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical axis shiftt	6:1	6:1	6:1	6:1	13:1
Keystone correction range	Vertical: approx. ±30° (±20° auto keystone)
Installation	Ceiling/floor, Front/rear
Built-in Speaker	--	--	3.2 cm x1 (round) / Output power: 1 W (monaural)
Terminals
Computer IN 1 / S-VIDEO IN	D-sub HD 15 pin (female) x1 (RGB / YPbPr / YCbCr / S-VIDEO x1) (The D-sub/S-VIDEO conversion cable [ET-ADSV] is required for inputting S-VIDEO signals.)
Computer IN 2 / Monitor OUT	--	--	D-sub HD 15 pin (female) x1, (input/output selectable using on-screen menu) (With Monitor OUT selected, the Computer IN 1 signal is output.)
Video IN	RCA (Composite VIDEO)
Audio IN	--	--	RCA x2 (L, R x1) for VIDEO input
Computer audio IN	--	--	M3 x1 (L, R x1)
Serial IN	D-sub 9 pin (male) x1, for external control (RS-232C compliant)
LAN	RJ-45 x1 (for network connection, 10Base-T/100Base-TX, Compliant with PJLink™, Class 1)
General
Power supply	100-240 V AC, 50/60 Hz
Power consumption	287 W (0.47 W when standby mode is set to ECO^*4)	297 W (0.47 W when standby mode is set to ECO^*4)	297 W (0.47 W when standby mode is set to ECO^*4)
	7.1 W in Serial standby mode	8.6 W in Serial standby mode	8.6 W in Network standby mode
Operating noise	37 dB (Lamp mode: HIGH), 34.1 dB (Lamp mode: NORMAL), 29 dB (Lamp mode: ECO)
Operating temperature	5° - 35°C
Humidity	20% - 80% (no condensation)
Dimensions (W x H x D)	349 x 105 x 247 mm (without protruding parts)
Weight	2.90 kg	2.90 kg	2.99 kg	2.99 kg	2.99 kg
Power cord	2 m
Cabinet material	Moulded plastic

^*1 The values given for the recommended lamp replacement cycles are maximum and may differ depending on usage.
^*2 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
^*3 Input signals that exceed this resolution will be converted to the native resolution.
^*4 When the standby mode is set to ECO, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.

ویدئو پروژکتور پاناسونیک PT-LX26

محصولات مشابه