ورود/ثبت نام
این کالا در هیچ فروشگاهی موجود نیست.
- Mainstream segement MB, support LGA1155 for Intel®sandybridge processors
- Support dual channel 4 DIMMs DDR3 memory up to 16GB at 1333/1066
- SATAII / SATAIII controller integrated
- Support VGA, DVI and HDMI interface
- Support 2* USB 3.0 ports
- Gigabit LAN and 6-channel HD audio
Processor Supports LGA1155 for Intel Sandybridge/Ivy series CPU
Support CPU TDP 95W
Support 32nm CPUChipset Intel® H61 chipset ,HD Graphics Support Front Side Bus Memory Dual channel DDR3 1333/1066 x 4 DIMMs, Max. 16GB** VGA on Die Expansion Slots 1* PCIe2.0 x16 slot
1* PCIe x1 slot
2* PCI bus slotsIDE N/A Serial ATA(SATA)/RAID 4* SATA II ; 2* SATAIII Audio 5.1 channel HDA LAN Gigabit LAN IEEE1394 N/A Back Panel I/O Ports 1x PS/2 KB/MS port.
1x DVI-D port
1x VGA port
1x HDMI port
1x RJ45 Lan port
1x audio jack supports 3 jacks.
2x USB3.0 ports
4x USB 2.0 ports.
(The IO placement only for refernece)Internal I/O Connectors 1x ATX 24-Pin power connector
1x 4-pin ATX 12V power connector
1x 4-pin CPU /1x 4-pin System FAN
1x Front pannel header
1x Front Audio header
1x S/PDIF out header
1x COM header
1x Parallel header
4x SATA2 ports
2x SATA3 connector
2x USB2.0 headers
1x TPM header
1x Intruder Alarm header
1x CLR_CMOS header
1x Speaker headerBIOS Features Flash EEPROM w/ LAN boot PnP, ACPI, WfM, DMI 2.0 Support CD Drivers, Adobe Reader, SuperUtilities, Norton Internet Security Standards/Manageability USB2.0, DMI 1.5 Special Features **1. If you want to install one memory module, you must install it in the blue slots (DIMM1 or DIMM3).
2. If you want to install two memory modules, for optimal compatibility and reliability,recommended to install them in the blue slots (DIMM1 and DIMM3). It can activate Channel Memory Technology.
3. If you want to install three memory modules, they must be single-sided,and two ofbe installed in the blue slots (DIMM1 and DIMM3),they will run at DDR3 1066 only.
4. If you install four memory modules on this motherboard, they must be single-sided,will run at DDR3 1066 only.
5. You can’t install the double-sided memory in the white slots (DIMM2 or DIMM4).Form Factor mATX form factor 9.6 inch x 8.8 inch - 4 layers PCB