CISCO Catalyst 3750 v2 Series WS-C3750V2-24PS-S 10/100/1000Mbps + 1000Mbps Switch

Learn more about the Cisco Systems, Inc. WS-C3750V2-24PS-S

Standards: IEEE 802.1s
IEEE 802.1w
IEEE 802.1x
IEEE 802.3ad
IEEE 802.3af
IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p CoS Prioritization
IEEE 802.1Q VLAN
IEEE 802.3 10BASE-T specification
IEEE 802.3u 100BASE-TX specification
IEEE 802.3ab 1000BASE-T specification
IEEE 802.3z 1000BASE-X specification

Cabling: 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1, 2 (negative) and 3, 6 (positive)
100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling
100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1, 2 (negative) and 3, 6 (positive)
1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling
1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single and multimode fiber)
Cisco StackWise stacking ports: Copper-based Cisco StackWise cabling that is also compatible with the StackWise Plus technology in the Cisco Catalyst 3750-E Series Switches
Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45-to-DB-25 socket data-terminal-equipment (DTE) adaptor (can be ordered separately from Cisco; part number ACS-DSBUASYN=)

LEDs: Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications

System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications

Power: Input Voltage:
- 110 V AC
- 220 V AC
Input Voltage Range: 100 V AC to 240 V AC
Power Source: Power Supply
Redundant Power Supply: Yes

Features: Lower power consumption than its predecessors

Backward compatible with Cisco Catalyst 3750 and 3750-E Series Switches

Full EnergyWise support to monitor energy consumption of network infrastructure and implement energy saving programs to reduce energy costs

Compatible with Cisco Redundant Power System (RPS) 2300

Uniform depth of 11.9 inches on all units for better cable management

Preconfigurable with a Cisco IOS Software release at the time of ordering

IPv6 routing included in the IP Services feature set