EnGenius PoE Injector is easily to extend the wired connection distance through the Ethernet cable which avoid the long power line which might bring dangerous and incident.

EPE series is a single-port power injector for Power-over-Ethernet (PoE) applications for use with gigabit systems. Unlike existing power injectors, the models are not limited to working only on 10baseT, 100baseT or gigabit baseT systems, but are compatible with systems up to 1000 Mbps.

Outdoor Networking Facility and Low Port Density Installations

The EPE-4818G PoE generates safe power over category 6/5e/5. By sending 48V, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely.

Reliable and Sustainable Use

EPE-4818G offers power supply up to 48V/0.5A with Ethernet cable. 4 Pairs are with data transmission; pin # 4,5 and 7,8 with power enabled to device via center tap (center tap is a connection made to a point half way along a winding of a Transformer).

Standards	IEEE802.3 10Base-T, IEEE802.3u 100Base-T, IEEE802.3ab Gigabit Ethernet
Protocol	CSMA/CD
Ports	1 x Data-in, 1 x PoE Out, 1 x DC Jack
Data Lines	Pair1 : Pin1&2, Pair2 : Pin3&6, Pair3 : 4&5, Pair4 : 7&8
Power	Input : AC100-240V, 50-60Hz Output : DC48V/0.5A
Diagnostic LEDs	Power on : Green
Power Consumption	24W
Temperature	Operating : 0 to 60^oC, Storage : -30 to 80^oC
Humidity	5% to 95%
Dimension	82mm x 46mm x 21mm
Reliability	25,000 hours

آداپتور برق مودم و تجهیزات poe شبکه ان جنیوس EPE-4818G

محصولات مشابه