Overview:

Place PoE-enabled Access Points and IP Cameras Where You Need Them

The EPE-5818Gaf is an 802.3af compliant PoE injector with two Gigabit ports - one port for a connection to an Ethernet switch and the other for connection to a PoE-enabled device. The injector delivers both data and electrical power to PoE-enabled devices using a single Ethernet CAT6 cable enabling network administrators to connect and power VoIP (Voice-over-IP) phone systems or to mount Wireless Access Points and IP Cameras in ceilings or in crawlspaces or where power outlets may not be available.

Eliminate the limitation of placing an (802.3af) PoE-enabled device, such as a Wireless Access Point or IP Camera near a power outlet. The EPE-5818Gaf delivers both data and electrical power to PoE-enabled devices using a single Ethernet CAT6 cable. EPE-5818Gaf PoE injector is 802.3af compliant, and also features two Gigabit Ethernet (10/100/1000 Mbps) ports - one port for a connection to an Ethernet switch and the other for connection to a PoE-enabled device.

It uses standard IEEE pin definition to power the device, and comes with a 48V/0.375A power supply. Pin# 1, 2, 3 and 6 for data transmission; pin# 4, 5, 7 and 8 for power to the device. The EPE-5818Gaf PoE generates power over CAT6 cable up to 300 feet (100 meter). By sending 48V, Ethernet terminals such as Wireless LAN Access Points, IP Phones and IP Cameras can be powered more remotely from an Ethernet switch. The PE-5818Gaf is especially useful for outdoor networking deployments and low port density installations.

EPE-5818Gaf is a single-port power injector for Power-over-Ethernet (PoE) applications for use with gigabit systems. Unlike existing power injectors, the EPE-5818Gaf is not limited to working only on 10baseT or 100baseT systems, but is compatible with systems up to 1000 Mbps. It can easily extend the wired connection distance through the Ethernet cable which avoids the long power line which might bring dangerous and incident. EPE-5818Gaf offers power supply up to 48V/375mA with Ethernet cable. 4 Pairs are with data transmission; pin # 4,5 and 7,8 with power enabled to device via center tap (center tap is a connection made to a point half way along a winding of a Transformer). The EPE-5818Gaf PoE generates safe power over category 6e. By sending 48V, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely. It is especially design for outdoor networking facility and low port density installations.

Features and Specification
Standards	IEEE802.3 10Base-T, IEEE802.3u 100Base-T, IEEE802.3ab Gigabit Ethernet
Protocol	CSMA/CD
Ports	1 x Data-in, 1 x PoE Out, 1 x DC Jack
Data Lines	Pair1: Pin1&2, Pair2: Pin3&6, Pair3: 4&5, Pair4: 7&8
Power	Input: AC100-240V, 50-60Hz Output: 48V, 375mA Pair3: 4&5, Pair4: 7&8
Diagnostic LEDs	Power: Green
Power Consumption	12.95W
Reliability	25000 hours
Environment & Mechanical
Temperature Range	Operating 0°C~60°C Storage -10°C to 70°C
Humidity (non-condensing)	5%～95% typical
Dimensions	82mm (L) x 46mm (W) x 21mm (H)
Weight	180g

آداپتور برق مودم و تجهیزات poe شبکه ان جنیوس EPE-5818GAF

محصولات مشابه